If you regularly groom your dog at home, you understand the struggle of trying to keep your dog calm and still. A dog grooming table is a good tool, which provids you a stable and leveled surface to safely secure your dog while saving your back from constant bending. Installing a dog grooming table is also easier than you might think. In this article, we’ll walk you through how to install a CO-Z dog grooming table, step-by-step.
How to Install a Dog Grooming Table: A Step-by-Step Guide
Most dog grooming tables come with all the parts and tools you’ll need for setup. For the CO-Z dog grooming table, the installation process can be divided into four main parts: unpacking, installing the casters, installing the grooming frame, and installing the half moon bucket. Simply follow the instruction below, making sure each component fits snugly into place.
Part 1 Unpacking
Step 1: Uncrate the grooming table carefully and keep the packaging out of the reach of children and pets.
Step 2: Check that the grooming table is intact and free of damage of any kind, such as a dent.
Step 3: Check that you have all the accessories for your grooming table model.
Part 2 Installing the Casters
Note: The caster installation requires two people to complete.
Step 1: Lean the grooming table against a wall or a solid surface with the bottom facing up.
Step 2: Fasten the double-ended bolts onto the caster plates.
Step 3: Secure them on the table by tightening the nuts on the casters.
Step 4: Set the grooming table flat on the floor after installing the casters.
Part 3 Installing the Grooming Frame
Step 1: Power up the grooming table.
Step 2: Raise the table to a proper height for installation by the foot controller.
Step 3: Attach the grooming arm brackets on both sides using the provided hex bolts and wrench.
Step 4: Insert the two grooming arm vertical rods into the brackets.
Step 5: Secure the two rods using the provided thumb screws.
Step 6: Install the tool organizer and tighten it with the provided thumb screws.
Note: The tool organizer can also be installed on either vertical rod. Adjust its orientation as needed.
Step 7: Measuring the length of the horizontal rods against the two installed vertical rods, connect the two grooming arm horizontal rods to each other and secure them with the provided thumb screw.
Step 8: Insert the horizontal rods into the vertical ones.
Step 9: Secure them with the provided thumb screws.
Note: Adjust the grooming arms’ height according to the size of your pet.
Part 4 Installing the Half Moon Bucket
Step 1: Tear off the film behind the adhesive bucket hook and stick it on the appropriate location. It is recommended to stick it in a convenient place to discard garbage.
Step 2: Align the hole of the half-moon bucket and slide down to fix the bucket.
Step 3: Place in a trash bag and secure with the trash bag clip.
Safety and Stability Check
After you complete the assembly of your table, perform a quick safety check prior to grooming your dog.
-
Verify that all screws, bolts, and clamps are properly tightened.
-
Confirm that the table does not wobble and that all legs of the table are positioned evenly on the floor.
-
Check that any non-slip pads or feet are securely attached.
Recommended Option: CO-Z Dog Grooming Table with Adjustable Height
The CO-Z Dog Grooming Table with Adjustable Height is a great option if you need a grooming table that's sturdy and user-friendly. These tables are designed to make at-home grooming more comfortable and usable for both pets and owners. Here’s what makes it stand out:
-
Electric Height Adjustment: Effortlessly raise or lower the table with a simple foot pedal, helping you maintain a comfortable posture during grooming.
-
Heavy-Duty Construction: The sturdy steel frame provides exceptional stability and supports dogs of various sizes and breeds.
-
Non-Slip Surface: The textured tabletop prevents slipping, keeping your dog safe and secure throughout the grooming session.
-
Spacious Work Area: Offers plenty of room for grooming tools and movement, ideal for both home and professional use.
This model combines functionality with comfort, helping you create a professional-grade grooming setup right at home.
Make Grooming Easier at Home
Creating a grooming station for your dog is incredibly easy and will allow for a much simpler grooming experience for both you and your dog. With a sturdy table and the right setup, you can save time, mess and help the dog stay calm and relaxed during grooming.
The CO-Z Dog Grooming Table can be helpful if you are looking for a dog grooming table. It’s easy to assemble, built for stability, and designed to make at-home grooming feel professional and stress-free.
